Use this chart to identify which filtration system filters out the contaminants in your water.

Contaminants	WFA12	WFA6	2CB5 K	4CB5 K	H 54	H104	S 104	Microgard	IN 10	IN 12
MICRON RATING	0.5	0.5	5	5	0.5	0.5	0.5	0.15	n/a	n/a
FLOW RATE (LPM)	1.9	1.9	3.8	6.34	1.9	1.9	1.9	3.8	2.84	2.84
CAPACITY (L)	2,840	750	11,355	22,710	2,835	3,780	3,780	8,330	9,085	18,170
Dirt
Rust
Turbidity
Bad Taste
Odours
Chlorine
Chloramines
Mould
Algae
Asbestos Fibres
Oxidised Iron
Oxidised Manganese
Oxidised Sulfides
Cysts
Cryptosporidium
Giardia
Entamoeba
Lead
Limescale
Microbiological Growth
Bacteria

L - Litre, LPM - Litre per minute

Everpure® Filtration Systems remove potentially harmful contaminants and deliver sparkling water right from the tap.

Everpure® Filtration Systems complement the healthy lifestyle that modern families just can’t afford to compromise. Everpure® provides up to 40 times finer filtration than other systems.

You will have peace of mind and enjoy great tasting water at a fraction of the cost of bottled water.

Precoat filtration reduces off-tastes and odours and removes 99.99% of all particles as small as 1⁄2 micron in size.

Certifications: NSF Standards 42 and 53 and Australian Standards Approved .

Everpure® WFA12 filters remove

• harmful contaminants such as cryptosporidium and giardia cysts, Chlorine, off-tastes and odours, asbestos, dirt and rust
• Change every 12 months
• Everpure® filters DO NOT remove fluoride and essential minerals
  

For more information click here

Back to top

The Everpure WFA 6 Filter cartridge produces 750 litres of clean clear filtered water which will last the average family 3 to 6 months.

Our Everpure Filter cartridges are NSF certified and Australian Standards approved for the removal of Chlorine, Bad Tastes, Bad Odours, Dirt and Cloudiness, Giardia, Cryptosporidium, Mould and Algae, Asbestos Fibres, Oxidised iron, Oxidised Manganese, Oxidised Sulfides, Entamoeba cysts, 99.9+% of all particles 1⁄2 micron and larger in size. Everpure® filters DO NOT remove fluoride and essential minerals

Certifications: NSF Standards 42 and 53 and Australian Standards Approved.

Back to top

Removes particles down to 5 microns.

• Slime and microbial control and Carbon block technology provides dirt, chlorine, taste and odor reduction.
• Good for low flow and water pressure areas and low volume applications.
• Sanitary quick change cartridge is easy to install and replace.

Certifications: NSF 42 and Australian Standards Approved

For more information click here

Back to top

• Removes particles down to 5 microns.
• Slime and microbial control and Carbon block technology provides dirt, chlorine, taste and odour reduction.
• Good for medium flow and water pressure areas and low volume applications.
• Sanitary quick change cartridge is easy to install and replace.

Certifications: NSF 42 and Australian Standards Approved

For more information click here

Back to top

Taste the difference in every sip with the Everpure H-54 system. Designed with the unique Micro-Pure® technology, the H-54 reduces the following contaminants: lead, cysts such as Giardia lamblia, Entamoeba histolytica and Cryptosporidium parvum. This system also reduces: chlorine taste and odor, dirt and cloudiness, mould and algae, oxidized iron, oxidized manganese, oxidized sulfides.

• Particles 1/2 micron and larger in size
• The H-54 offers added peace of mind with several benefits, including:
• Reduction of lime and scale build-up in appliances that use water

Certifications: NSF Standards 42 and 53 and Australian Standards Approved

For more information please click here

Back to top

The same commercial quality that makes Everpure the overwhelming choice for water filtration in restaurants is also available for your home. Everpure’s exclusive precoat filtration technology combines Micro-Pure and a unique pleated filter membrane to reduce particles as small as ½ micron. The highly engineered filtering surface area, longer filter life and consistent performance.

The Everpure H-104 Drinking Water System reduces the following contaminants: lead, cysts such as Giardia lamblia, Entamoeba histolytica and Cryptosporidium parvum, chlorine taste and odor,dirt and cloudiness,mould and algae, oxidized iron, oxidized manganese, oxidized sulfides.

Certifications: NSF Standards 42 and 53 and Australian Standards Approved

For more information click here

Back to top

The Everpure S-104 Drinking Water System is the practical solution for filtering out disinfectant chlorine, lead, dirt, rust, asbestos fibres, microscopic protozoan cysts and other particulates from drinking water, including oxidized iron, manganese and sulfides.

The Everpure S-104 Drinking Water System reduces or removes the following contaminants: Bad tastes and odours, Chlorine, Dirt and cloudiness, Giardia lamblia cysts, Entamoeba histolytica cysts, Cryptosporidium parvum cysts, Mould and algae, Asbestos fibres, Oxidized iron, Oxidized manganese, Oxidized sulphides, 99.9+% of all particles ½ micron and larger in size.

Certifications: NSF Standards 42 and 53 and Australian Standards Approved

For more information click here

Back to top

Everpure’s multi-stage filter for drinking water applications combines membrane and carbon block technology for superior filtration results down to 0.15 microns.

Capillary membrane reduces 99.9999% of bacteria, asbestos fibres and cysts such as Cryptosporidium and Giardia.

Certifications: NSF Standards 42 and 53 and Australian Standards Approved

For more information click here

Back to top

• The Everpure IN-10 in-line filter is designed for long life in a variety of applications – perfect for coffee, espresso and ice applications.
• The filter reduces chlorine, taste and odour, which can cause coffee to taste bitter.
• The Everpure IN-10 inhibits the formation of lime scale, which can shorten the life of equipment.
• In-line design is compact and installs out of sight behind equipment.
  

Everpure IN-10 Inline Filter Specs:

• Dimensions: 10.5" L x 2.0" Diameter
• Inlet Connection: 1/4"
• Outlet Connection: 1/4"
• Temperature: 2 - 38°C
• Pressure Requirements: 10 - 125 psi (0.7 – 8.6 bar), non-shock

Certifications: NSF 42 and Australian Standards Approved

Back to top

• The Everpure IN-12 in-line filter is designed for long life in a variety of applications – prefect for coffee, espresso and ice applications.
• The filter reduces chlorine, taste and odour, which can cause coffee to taste bitter.
• The Everpure IN-12 inhibits the formation of lime scale, which can shorten the life of equipment.
• In-line design is compact and installs out of sight behind equipment.
  

Everpure IN-12 Inline Filter Specs:

• Dimensions: 10.5" L x 2.0" Diameter
• Inlet Connection: 1/4"
• Outlet Connection: 1/4"
• Temperature: 2 - 38°C
• Pressure Requirements: 10 - 125 psi (0.7 – 8.6 bar), non-shock

Certifications: NSF 42 and Australian Standards Approved

Back to top